Industry news

Caution and smart meter installation method Daquan

Caution and smart meter installation method Daquan

Caution and smart meter installation method Daquan

Lead: Lift the smart meter I believe we will have some more or less understand, a lot of people should be equipped with a smart meter, then you know the smart meter installation method do, and usually in the use of smart what should you pay attention to the following small series? come with everyone look smart meter installation method and its precautions it.

Smart meter installation method

1, first select the appropriate location to install the smart meter to find the correct installation caliber.

2, the installation remember is mounted horizontally. The surface of the smart meter is up, the smart meter housing have an arrow, watch the water flow in the installation direction of the arrow direction is consistent. Smart meter is not suitable for installation in a place where there is sun exposure and is flooded, it will be polluted local smart meter to be read, so during installation and disassembly of course, should also pay attention to meter reading convenience. To avoid the meter fails, install a new pipeline is sure to clean the inside of the debris, which will effectively reduce the unnecessary trouble meter.

3, before and after the smart meter should install a valve gate , so you can control the water flow, the use of smart meter time to both gates are open. In addition to installing the valve outside should also be on the downstream straight pipe run, the straight pipe is necessary, the straight tube length also have certain requirements, 10D following is an upstream pipeline requirements, 5D following is downstream piping requirements.

4, installation of Water Meters is also a factor to be considered, the accuracy of measurement of the smart meter, water meter in order to ensure accurate, we should be downstream of the pipeline installation in more than 0.5 meters above the water meter position. Another influence is the cleanliness of the water meter pipe, if the pipe debris is likely to result in the inaccurate measurement, so more attention should be in normal use, there is something to clean up debris and clean as soon as possible.

Note the use of smart meter

1, the smart meter needs to be replaced, remember to moisture after replacing the cover, tighten the screws, otherwise, the smart meter will not work. Such smart meter will not be able to play its due role.

2, in the long run without the use of water when remember to turn it off valves upstream and downstream of, or likely to cause damage to the smart meter, and the damage this situation is generally not responsible.

3, must be one meter moisture freezing, especially in the winter, be sure to smart meter certain protective measures. In addition, if such a failure that the electronic smart meter display on the actual character wheel is not the same phenomenon occurred the measurement error, we look at the actual character wheel.

After introduction Xiaobian believe that the fight against the installation of the smart meter and considerations have a certain understanding, in their daily lives must pay more attention.



Contact: Nancy Li

Phone: 0086 13131984716

Tel: 0086 03193131898


Add: Hebei,China

Scan the qr codeClose
the qr code